Sheet Metal Bending

CNC press brake bending for brackets, enclosures, and formed structures. Accurate bend angles, consistent K-factor compensation, up to 4 m bend length.

Get Instant Quote →

Bending Capabilities

CNC Press Brake

Tonnage up to 300T, bend lengths to 4 m. Programmable back-gauges ensure repeatable accuracy across entire runs.

K-Factor Compensation

Material-specific K-factor tables eliminate springback errors — flat patterns are always calculated correctly.

Complex Multi-Bend Parts

Up to 12 bend sequences per part with automated tool changes — boxes, channels, Z-profiles in one setup.

DFM Feedback

Our engineers flag bend-radius violations, flange-length minimums, and hole-to-bend clearance issues before cutting.

Design Guidelines

Min. bend radius= material thickness (≥ 0.5 mm)

Min. flange length3× material thickness

Hole-to-bend clearance≥ 2× material thickness

Angular tolerance±0.5°

Flatness after bending±0.3 mm per 300 mm

Max. thickness (steel)12 mm

FAQ

Should I supply a flat pattern or a formed 3D model?

Supply the 3D STEP file — our CAM software automatically unfolds it using the correct K-factor for your material and thickness.

What is the tightest inside bend radius you can achieve?

For 1 mm mild steel, minimum inside radius is 0.5 mm. Tighter radii cause cracking; we will flag this in the DFM report.

Can you bend aluminium without cracking?

Yes. We anneal where necessary and orient the bend perpendicular to the rolling direction to prevent cracking on hard alloys.

Accurate bends, every time.

Upload your STEP file and get a bending quote with DFM feedback.

Start Your Quote →